I also had to make the top, so I took a wider mouth cup from my kitchen and traced a circle and then cut out 8 of those. I used a really thick double iron on interfacing and fused the two circles together, but I made the interfacing circle smaller than the fleece so I didn't have to sew through 4 layers of fleece and thick interfacing. When all of those were done I bought a 1, 3, 5, and H to put on top of the covers. I bought the iron on numbers that were a little thicker so they would last longer. But not only did I iron it on, but I sewed around it as well.
Then I bought black socks (cause they never get dirty!) for the neck of the covers. I just cut them where I thought they would look the best. I didn't worry about cutting them too straight cause I knew the edges would be covered by the fabric.
Then I sewed the two pieces together along the top edge, and then I sewed the back edges together.
Once that was done I sewed the top circle to the rest of the fleece. When you do this make sure that the number is facing the front of the sock. You don't want the number facing the back seam.
Once the top was sewn on I took the black sock and turned it inside out with the rest of the cover the right side out. I did it the first time with them both inside out and I ended up with the top inside out and the neck the right way. So I had to unpick, not fun! Pin all of it together and sew around the top. I did about a half inch seam just to make sure I got all the different layers.
Once you've sewn that it's finished, and you have custom golf club covers that don't take too long and don't cost and arm and a leg!!
The only sad part is he can't use them for another 5 months. Oh well, it'll be like getting a present twice!
These magnets are really good. They actually work!
You also use these flat marbles.
Then you put it onto your scrap booking paper and smoosh it down so the gloss goes over everything. You can see the bottom right one the gloss isn't everywhere and the others you can't see the gloss cause it's all over.
Melissa told me to put the marbles on first cause all the marbles are different sizes and you can cut them out after they've dried so you don't have to match them up after you've cut them out.
Then you cut them out and use a little super glue on the back and put the magnet on the back, let it dry and then you are done! The only thing I wish I would've done different was put less super glue on because I put too much and it seeped through so you could see it through the marble. But other than that I liked how they turned out!
